In our time it is really very crucial for each person to become an environmentally conscious individual. The first steps that could be done in order to achieve this is try to keep your home eco-friendly. The point is that there are a number of methods to make your lifestyle more “green”, for instance you can make use of compost heaps and recycle your plastics, papers and aluminums. But the truth is that there is something more that you can without problems do – save water.
You might wonder how to do this? Well, there is nothing complicated about it. Dual flush toilet is the answer that you were seeking in order to lessen your water use. It should be stated that there are dual flush toilet systems, where one lever flushes a full tank and one lever flushes half a tank. Needless to say that they’re unique, and, in fact, they even add a certain amount of smartness to your bathroom.
The other great news for you to find out is that you will not necessarily have to substitute your entire toilet. Actually, you can even do it by yourself even if you are not a plumber. So, in order to modernize your toilet and make it more eco-friendly you should just buy a dual flush toilet retrofit kit. You need also to keep in mind that these kits are relatively economical and almost certainly you will not have problems while installing one.
So, in the case you decide to install this kit by your own, read carefully the next tips that will certainly aid you a lot.
The First Step – you should turn off the water supply to the toilet and drain tank and then use a sponge to remove the extra remaining water from the tank.
The Second Step – you should disconnect the tank’s inlet fitting from the water supply and then unscrew the two bolts that are there to hold the tank down to the toilet.
The Third Step – you should separate the flush handle from the tank and then put the tank down on a towel. Then, using a channel-locking plier, remove the large flush valve holding nut.
The Fourth step – you should install the dual flush toilet kit valve – the tapered rubber gasket goes on the inside of the tank to prevent leakage. Bear in mind that you should make tighter large nut until secure.
The Fifth Step – you should install the two rubber gasket tie-down bolts and their lock nuts to the bottom of the tank. After that you should cautiously bolt the tank down to the toilet using the second set of rubber gaskets and nuts. It will be useful for you to know that at this stage it is recommended to utilize completely new tank tie down bolts that can be simply purchased at any hardware store at inexpensive price.
The Sixth Step – you should assemble the new arms as per required length between the handles and the new flush valve. In the case there will be such a need, you can cut them with a hacksaw.
The Seventh Step – you should insert the small and large handles into the handle-hole in the tank (insert spacer if needed). Then you should hook long arm into overflow tube, and short arm into release pole. Slide short and long arms into place on the handles and make use of clip in order to make safe and then connect the refill tube from the fill valve to the nipple on the long arm.
The Eighth Step – you should release water supply to the tank. Be very watchful and fill slowly in order to trial for leaks. As a matter of fact you may want to label the large and small handles as “full” and “half”, but that is individual preference.
In the case you will follow this easy instruction you will have no troubles with the installation.
Read dual flush toilet reviews and cistern toilet info.
Get important tips about the topic of internet marketing MLM – please make sure to study this web site. The time has come when proper information is truly within one click, use this possibility.
Join The Landscaping Club
Instant Landscaping Ideas
Gardening Made Easy
